Sunday, November 24, 2013

Scalloped Border Tutorial

Did you get to visit Jane's blog to see my entry for the Love of Embroidery tour? If not you can go here to see my projects. I thought I would share a tutorial with you on how I made the inside scalloped border. This old page out of a magazine was my inspiration.
For this project you definitely need some kind of graph paper. As you can see from the drawing  the sides and the bottom have to be in even increments. I measurement  the size of the project I wanted to frame so that the scallops would fit around it. I counted the spaces on the graph paper and placed dots where the curved edges would meet. I think you can see where the dots are on the high and low places.
Then I cut out the center
and the outside edges.
This is the size I wanted the frame to be around my embroidery project.
Next I marked the fabric in the corner with a little dot using a water eraserable blue pen. It is hard to see but maybe if you enlarge the photo you can see it. This helped me later when I got ready to place the top border fabric in place.
Next I cut out the center.
I have several of these very helpful books when I need some help trying to figure out a technique.
I wanted to make a mitered border for my frame.
First I cut out strips of fabric.
Next using that blue dot on my background fabric I pressed the mitered border.
The book shows using painters tap to make you miters stay in place.

With the tape holding my fabric I can then sew the strips together.
Trimmed and ironed.
Sorry I could get the picture for this next step in focus but I used the paper pattern to trace the scallop design on my border fabric. I used the water erasable pen again.
I pinned it to the background fabric
I hand appliqued the inside edge to the background using matching thread. I used needle turn applique. Once I had it appliqued I trimmed the background 1/4" from the edge even with the blue fabric.  Here is my project all finished. I hand quilted 1/4" from the inside scallop. I decided to sew the layers together without binding. You can see how to do this technique here.  It is a great way to finish small quilts. The embroidery pattern is from my friend Michelle at The Raspberry Rabbits.
If you have any questions just leave them in the comment box and I will try to answer them. Maybe you  can try this technique on a little quilt.

With Passion,
Carrie P.

17 comments:

moosecraft said...

Wow! That's a lot of very useful information! Thank you!

Pieced Pastimes said...

Hi Carrie,
Your instructions are great and your quilt is as sweet as can be.
Warmest Regards,
Suzanne
Pieced Pastimes

KaHolly said...

Fabulous job explaining your process! It was a lot of work, but look at how beautiful it came out!

Melody said...

Wow, I'll definitely be book marking this fabulous tutorial. So much useful information. Love your embroidery too.

Rosa said...

Your quilt is pretty nice and the tips are great.Both borders are beautiful.I`ve never done mitered border or scalloped border,they look a little tricky for me.Have a fun week!!

Carla A Few Of My Favorite Things said...

This really jazzes the whole piece up! I just saw a tutorial this week where the quilter used painters tape to join binding tails, similar to what you did, nifty idea! Thanks so much for sharing!

WoolenSails said...

That i a really nice tutorial and such a nice look to frame a piece.

Debbie

Jane's Fabrics and Quilts said...

Oh thank you so much for this amazing tutorial!

Melissa said...

Great tutorial! Thank you so much for sharing!!!

Deb Fox-McHugh said...

That's a really nice touch. I will definitely try hat! Thanks for the tutorial.

Siouxzq64@gmail.com said...

Great explanation and love how it turned out. Very beautiful.

LJ said...

You said, "I hand appliqued the inside edge to the background using matching thread." It looks like you did a needle-turn applique process; am I right? Your instructions are great though it still looks pretty complicated. I definitely am going to give this a try; you've given me much more confidence. Thanks.

Abby and Stephanie said...

Adorable. Scallops and miters are like zippers. I want to do them but they give me the hives! :o) I have done miters and zippers though.

Sheila said...

Carrie your tutorial is wonderful , such a pretty border on a pretty stitchery , thanks for the great instructions , I will have to give this a try ,

Lynette said...

Oh, this is super handy! Thank you for detailing how you did the scallop framing. Definitely need to pin this one.

Wendy said...

lovely! I love that stitching you've done, such cute bunnies!

Wendy said...

lovely! I love that stitching you've done, such cute bunnies!